Pay in installments of $5.03 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Nov 9 - Nov 14
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
baby jogger turn car seat Baby Jogger City Turn Convertible Car SeatThe Baby Jogger City Turn Convertible Car Seat features a secure rotating mechanism that allows you to turn the seat 180 degrees with one hand while in rear facing mode. This unique, patented rotation brings your child 25cm closer to you and helps you maintain a more upright posture when lifting your child in and out. This gives you greater access and visibility when buckling them into the car seat. The car seat converts from rear facing harness (1.
The Baby Jogger City Turn Convertible Car Seat features a secure rotating mechanism that allows you to turn the seat 180 degrees with one hand while in rear-facing mode.
This unique, patented rotation brings your child 25cm closer to you and helps you maintain a more upright posture when lifting your child in and out. This gives you greater access and visibility when buckling them into the car seat.
The car seat converts from rear-facing harness (1.8–22.7kg) to forward-facing harness (10–29.5kg) to grow with your child. The extendable height also accommodates a child up to 124cm tall, which allows for even the tallest of 5-year-olds.
Features
- Secure rotating mechanism allows you to turn the seat 180 degrees with one hand (while in rear-facing mode)
- RAPIDLOCK™ base belt-tensioning technology and integrated push-button LATCH for simple, secure installation in seconds
- Rotation gives clear, direct access to the installation belt path, for our easiest install yet; coloured belt paths and dual bubble level indicators help ensure a proper and level install in your car
- Car seat audibly clicks when locked in rear-facing mode for assurance that it's safely secured before driving
- Steel-reinforced frame provides strength and durability; EPP energy-absorbing foam allows for effective impact energy management
- Engineered and tested with TRUE Test Plus™ safety standards (Tested to Reality Under Extremes) to help protect your child in rollover, side, front, and rear collisions; USA certification FMVSS213 and approved for NZ usage
- 5-point safety harness system
- Comfort is ensured with premium padding, a 10-position headrest, a removable infant insert for newborns, buckle covers, and soft, lightweight fabrics featuring COOLMAX® moisture-wicking material
- Five base angle positions ensure a level install and the no-rethread harness makes adjusting your seat quick and simple
- Dishwasher-safe cup holder to make cleanup easy
- 10-year car seat expiry
Note: This car seat cannot connect onto a stroller.
Care
- The City Turn Car Seat has a lifetime of 10 years, provided it has remained impact-free and fit for purpose without damage.
- Never use car seat without the seat pad attached.
- Carseat covers:
- Machine wash cover in cold water on delicate cycle and drip-dry. DO NOT USE BLEACH.
- Seat pad care: Refer to the care tag on your seat pad for washing instructions.
- Shell care: Spot clean using warm water and mild soap. Do not use any other cleaning agents or bleach.
-
Harness care: Surface wash with a damp cloth using warm water and mild soap; air dry. Do not machine wash harness or immerse in water, as doing so may weaken the straps.
If harness straps or lower anchor attachment belt become frayed or heavily soiled, do not use until resolved. Contact our customer service team for support with this. -
Buckle care:
- Removing buckle: Remove buckle to clean. Do this by rotating the car seat and locating the metal retainer on the underside of the seat shell. Rotate the metal retainer up through the shell and pad. From the front, pull out the buckle.
- Cleaning: To clean, place the buckle in a cup of warm water and gently agitate the buckle. Press the red button several times while in the water. Do not submerge the buckle strap. Do not use soaps, household detergents or lubricants. Shake out excess water and allow to air dry. Repeat steps as needed until it fastens with a click.
- Reattaching buckle: Re-insert the buckle into the same slot it was removed. Pull up on crotch buckle to make sure it is secured.
- WARNING! Inspect and clean buckle from time to time to remove any objects or debris that could prevent latching. - Cup holder care: Cup holder is dishwasher safe.
-
Storage:
- Always store the car seat in a dry and safe environment.
- Do not store outside or near a direct heat source such as a radiator or fire.
Weight + Height ranges
The car seat converts from rear-facing harness (1.8–22.7kg) to forward-facing harness (10–29.5kg) to grow with your child. The extendable height also accommodates a child up to 124cm tall, which allows for even the tallest of 5-year-olds.
Specifications
Age/ Height or Weight range
- Rear & forward facing convertible car seat
- Age 0 up to 6/7
- Child height up to 124cm rear or forward facing
- Child weight up to 22.7kg rear facing
- Child weight up to 29.5kg forward facing
Product weight
-
12.8kg
Safety Standard
- Complies with US FMVSS 213 safety standard
- Tested to TRUE Test Plus™ safety standards - provides enhanced protection through rigorous testing that exceeds the US FMVSS 213 standards
- 2 x structural impact force, side-impact and european-based rollover and rear-impact testing
Installation
- ISOFIX/LATCH up to 18kg or RAPIDLOCK belt tentioning technology install with seat belt. Tether required in forward facing mode.
- Car seat only rotates 180 degrees and only rotates in rear facing mode
Harness Type
-
5 point no re-thread harness with chest clip
Newborn Seat Insert
- Yes compatible from 1.8kg
Pram Compatibility
- No
Expiry
- 10 years from date of manufacture - current DOM 27/05/2025
Measurements
- Width: 50cm, Height: 60cm, Extended Height: 84cm, Depth: 59cm
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 6 reviews
Sort
Product Reviews
★★★★★ 2
Usb-c passthrough started failing about a year into ownership.
This had the potential to be the perfect accessory for my M4 MacBook Air. It is very difficult to find dongles like this that support display passthrough via usb-c (meaning that if you have a usb-c display you can connect it to this and use the display). When it did work, I was able to power a triple monitor setup with my 2 port Macbook Air (with one display being driven by a displaylink adapter).
If this product had continued to work as advertised, is would be a 5 star review.
But after maybe a year of VERY sporadic use (I use this maybe once a week because my MacBook Air is not often docked) the usb-c passthrough is already failing. On a display I use every day with a different machine (a 16" MBP that has enough ports to not need any adapters) and the display and cable work perfectly fine there so I can only assume that it is this specific adapter which is failing. If I insert the connector several times, sometimes I can get it to work but my success rate just keeps dropping. There was no other reason to spend this much on an adapter that without usb-c passthrough offers just 3 usb-a ports like most much cheaper adapters. So to say I am disappointed is an understatement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 4
Expensive, but it works
The good parts:
Yup, this works with DP alt mode, single cable use works for most devices I tried (steam deck, laptop, odin mini 2) even without the hub powered through the power in on the hub, I even got it working without external power to either the hub or my small usb-c monitor. However, some devices like my phone likely didn't give enough power for it to work without another power source. On my phone it worked for some usb devices without external power, but the dp alt mode didn't do work. DP alt on my phone works just fine with external power connected to the hub. Powering it with a small but powerful power bank worked fine, but lower power power banks might not keep up especially if the monitor isn't getting it's own power. It only takes a watt or two of power for the hub itself from some quick and dirty measurements charging my laptop through the pd-in on the hub.
As for the rest of it, the three usb 3 ports means you should be enough to get by for any use case, though you may need more dongles or adapters to get the type of connections you need, but quite usable as-is for a lot of purposes.
Basically it does what it says, there really is no other hub currently that can do pd alt mode, only big docks which need power supplies.
The ok parts:
*When it isn't powered* I noticed that with a monitor already plugged in, plugging it into a device would lead to the monitor not being initialized. But plugging the hub into the device first before connecting the monitor worked. No issue when it was powered. You can use this to get display out and charge with a Nintendo switch, but if it's not powered through the pd-in it probably wont switch to TV mode and output video, not sure if that's because of power or software reasons.
This is a nitpick, but if you care about the feel or aesthetic it's noticeably bland. The case is plastic and there seems to be no weighting on the inside, it's very light, which can feel cheap but it's not like adding weights would functionally make it better, the case also has a bit of a harsh feeling where it's joined, but it does feel solid and durable enough. It's clearly function over form, just barely meets the minimum bar imo.
The bad part:
You already saw, but the price is a bit steep for a hub (at $80). I'd love to see it at 60 or even 40 instead, I hope more similar hubs pop up for competition.
In summary:
It does what it says, if you know you want this and what it is then get it, I feel like it shouldn't cost this much, but it's quite usable and for now it's the only option for a DP alt mode hub.
Minus a half star each for subpar presentation and price 4/5
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 4, 2024
★★★★★ 5
Great for AR Glasses
This USB hub has been great for me! It's taken me so long to finally find a stable setup to allow using my XREAL Air glasses, peripherals, and charger at the same time. I've used this both with my phone and ROG Ally and I have not once had a problem. I even found that my ROG Ally manages to get the full supported PD of 65W, as long as I power the hub with a 100W PD charger. That said though, using a 65W PD charger is still more than adequate to charge the device while using various peripherals and a USB-C display.
Previously I used USB-C hubs with HDMI out and another device to merge the HDMI output with a USB-A connection into a single USB-C cable that I use for my AR glasses. This setup worked, but would increasingly stutter/freeze the longer I used it forcing me to constantly unplug and re-plug it in. In trying to find a solution that didn't split and merge back the display signal with USB data/power, this hub was the only one I found that wasn't thunderbolt 3/4.
I will say that I wish the cable to the host device was either longer and less rigid, or shorter with an optional extension cable. An ethernet port would have also been nice, but using up one of the USB-A ports with a USB ethernet adapter works if needed. Plus, if I wanted ethernet with it, then a dock would probably have been a better option over a hub anyway.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2023
★★★★★ 5
One of the only dongles that supports a usb-c display (alt mode) AND Power Delivery!
If you are like me and have laptop that only has a couple of usb-C ports (one of which has to be used for charging), but want to free up a port, this is the ONLY dongle I have found that does the job flawlessly AND affordably. The dongle has a usb C port. for power delivery as well as a second usb C that not only supports data, but has the necessary specs to support a usb C monitor (via DP alt mode).
This is only dongle I have come across that has the necessary hardware to support a usb C monitor for less than 100 bucks.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2024
★★★★★ 5
(Steam Deck Verified) Works like a charm on Dual QHD 2560x1440 (1440p)
This could be one of those reviews where I tell you how well this works for work Zoom Meetings and the Monthly TPS Excel reports. But my primary concern was the Steam Deck my secondary concern was being able to see more work. Luckily it worked for both.
The Steam Deck is capable of pushing to both 1440p monitors without any issues. I don’t have many AAA games, but if it helps: Hogwarts Legacy ran at full speed on auto detect (medium) graphics. No ghosting, no tearing, no lag. I tried No Man Sky for something with very high particle and blooming. Still ran like a champ. Mafia Definitive Edition runs like Estes Kefauver at a meeting of Murder Incorporated. If it runs on the Steam Deck this hub can push it… Remember my monitors are only QHD 1440p.
One laptop worked amazingly. 1440p Zoom Calls, Excel Spreadsheets as far as the eyes could see. BOTH EMAIL AND CHAT OPEN ON THE SAME SCREEN!
*Car salesman roof slap*
This baby has so many pixels.
The other laptop didn’t support video over USB-C nor Power Delivery. The USB hub worked very well as a USB hub though.
The USB ports are all fast and reliable. My USB 3.x devices have varying speeds. I don’t think any device measured the full through put, but given the equipment I have to work with (it could be the equipments fault) I am happy with a 4.8 out of 5.
Using the power delivery port on this hub will allow you to charge attached devices. Steam Deck charges, Laptops with USB-C Power Delivery charge. Laptops without power delivery will not charge.
The ports with pictures of keyboards, please plug your USB Keyboard and Mouse in these ports. These ports are USB 2.0. They will run slow if any other devices are plugged into them.
If your device does not support Thunderbolt, Alt HDMI, or Displayport over USB-C, You will not be able to use the video ports.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 23, 2023