Pay in installments of $6.42 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Nov 10 - Nov 15
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
cybex sirona base Cybex Sirona Gi i-Size 360 Car Seat with Isofix Base – Magic Black – Mamas & Papas UKCybex Sirona Gi i Size 360 Car Seat with Isofix Base Magic Black The latest car seat in the successful Sirona line is the most comfortable yet: the Sirona Gi i Size. Extended rear facing for safer travel up 20kg, this car seat also features integrated Linear Side impact Protection for defence from all directions. A range of innovative features also upgrade your childs comfort, including 360 rotation in any recline position with the easy rotation
Cybex Sirona Gi i-Size 360 Car Seat with Isofix Base – Magic Black
The latest car seat in the successful Sirona line is the most comfortable yet: the Sirona Gi i-Size. Extended rear-facing for safer travel up 20kg, this car seat also features integrated Linear Side-impact Protection for defence from all directions.
A range of innovative features also upgrade your child’s comfort, including 360° rotation in any recline position with the easy rotation handle, for smooth on and off boarding. Innovative all-round air ventilation means the ride stays cool.
Five recline positions are available in either direction to ensure ultimate comfort for your child, whether they’re a tiny newborn or a fully-grown four-year-old (newborn inlay accessory sold separately).
Comfort and safety for their first four years with the Sirona Gi i-Size.
*compared to the same seat forward-facing in a frontal crash. Result of internal testing using 2022 ADAC frontal crash test criteria.
Product Features:
- Extended rear-facing – one of the safest ways to travel in a car seat. In the critical first moments of a frontal impact, the child’s body is pushed against the padded car seat shell. This keeps movement to a minimum and reduces force acting on the child’s neck. Mandatory up to 15 months (76 cm), we recommend keeping your child rear-facing for as long as possible. The Sirona Gi i-Size is designed for your child to sit comfortably rear-facing until they weigh 20 kg.
- A stress-free start to your journey. Just swivel the car seat using the easy rotation handle to face the car door and get your child onboard, in any recline position. You can avoid back strain, while your child stays comfortable in the recline position that fits them, whether they’re a newborn or a toddler. Switching from rear to forward-facing travel is just as easy.
- The all-round air ventilation of Sirona Gi i-Size allows air to flow through ventilation channels within the car seat, carrying away heat and helping avoid a hot and sweaty ride for your little one. Choosing the mesh fabric available on the Plus version increases airflow even more – with up to 6 times more breathability than comparable car seat fabrics. The clear choice for comfort in any season.
- When you’re getting your child strapped into the car seat, you need all the help you can get. The Sirona Gi i-Size features ingenious loops designed to keep the harness out of the way as you get your child onboard.
- As your baby grows, adjust the Sirona Gi i-Size headrest for a comfortable fit at every stage. 12 positions allow a tailored fit to your child, with the harness lengthening automatically with each adjustment. And it can be adjusted with one hand for extra ease of use.
- The Linear Side-impact Protection defends your child against the force of a side impact. Working together with the energy-absorbing shell, the L.S.P. System significantly reduces the effect of impact force on the child.
- For every moment, whether your little one is a newborn or a growing child, the ideal recline setting is available in both riding directions – and in the boarding position, too. And when your child falls asleep in the seat, you can recline it with one hand, letting them dream that little bit longer.
- It only takes moments to set up your Sirona Gi i-Size. Use an ergonomic handle to click the ISOFIX into the vehicle seat and extend the load leg down to the car floor. Both provide stability and extra safety in the event of an accident. Visual indicators help you confirm the seat is ready to protect.
This Item Includes: Sirona Gi i-Size Car Seat & Integrated ISOFIX Base
Age Suitability: 3 months to approx. 4 years (from birth with newborn inlay – sold separately)
Weight Suitability: Max 20kg
Composition: Polyester blend
Health & Safety: UN R129/03
Care & Maintenance: Wash fabrics at 30 degrees, wipe down.
Self-Assembly Required?: Assembled
Dimensions: 71cm x 44cm x 75cm
Weight: 13kg
- Up to 50% higher safety levels
- Quick and easy on-boarding
- Optimal breathability
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 20 reviews
Sort
Product Reviews
★★★★★ 5
Great result, exceptional value, and easy, forgiving application.
Size: TRIM COAT KIT
I am thoroughly pleased with the results of this product, and the application was easier than I expected. Outstanding stuff. I am writing a longer review in case it helps people who are unsure about a "once and done" product that calls itself permanent. It's not hard to apply. It is forgiving and there's time to even it out. But here are some things to anticipate.
My use case:
I used Cerakote to restore the plastic trim on a used 2014 black Dodge Challenger that had been repainted but the plastic trim was original and it had been kept outside by the prior owner, so the contrast between the new paint and faded trim was noticeable. The trim was originally a deep, dark gray (it is never as black as the paint). It had faded to a medium-gray in many places: running boards on the side beneath the door, below the read bumper (which were also somewhat worn from debris), around the tail lights, and the plastic piece beneath the windshield wipers between the windshield and the hood. These were all looking weathered. The trim was very oxidized in some places, chalky grey near the hood and around the back bumper. The plastic around the tail lights also had light streaks in it from where water drains down from the trunk.
What else I tried before I tried Cerakote:
I got middling results from Mother's Back to Black. It looked somewhat better for a week or two, and then it went back to looking as before. Not impressed.
I got a tip online to try rubbing the plastic trim with a melamine magic eraser, so I did that next, and this made a significant difference. Melamine is abrasive, so be careful if you do this on your trim. I went gently, up-and-down, side-to-side and in small circles, by hand, with gentle pressure like one would with a polishing compound. By removing the oxidation, the plastic was a few shades darker in the worst spots and the streaking on the rear tail light piece was gone. The rough spots on the trim at the bottom of the car and around the wheels looked somewhat better. But it certainly did not "like new."
Cerakote experience:
I decided to give Cerakote a try based on the video and good reviews. Bam! Back to factory-like deep dark gray. I wish I had taken pictures. It's incredible. Fully satisfied!
I had already washed the trim with Dawn dish soap. I started with the trim bone dry. You are warned everywhere that water droplets will ruin the result, so don't expect to do this process right after you wash the car unless you like to live dangerously and have compressed air to spray cracks and crevices.
I was worried that application would be streaky if I didn't do it right. Not so. It is forgiving. Here's what I learned.
1) The first 20% of what you'll get out of the packet goes on heavy with the lightest touch. One packet goes a long way. The next 60% is the "normal" application. This goes on the easiest. You can really milk the last drop out of each towelette, but I didn't because the last 20% of what you can get out of it by rubbing it really hard comes out very light and is not worth the uneven application unless you have some random area you don't care much about and want to use the remainder for that. I only used 5 packets to do the whole car.
When you start a new packet, the beginning is where you might want to go back later and even it out once the application gets more normal. Or better, start a new packet on a big section to spread it around well and then move to smaller trim when the towelette is less fresh.
2) You've got time to work with it and make corrections. It stayed liquid like water for at least 20 minutes in my conditions: about 80 degrees, not very humid, indirect sunlight on an 80 degree car. Don't apply in direct sun or on a hot car. The product then gets sticky as it cures, but you can still work with it during the sticky time, rubbing it in and spreading it evenly with the towelette. I did not use a microfiber to "knock down" heavy spots. I just came back around with the towelette. I think a dry microfiber might pull off too much product. When it is half-cured, it is sticky and you can buff it with the towelette at this stage to further flatten and even things out. Work in sections, one piece of trim at a time.
3) Overlaps won't show as long as you rub it all in thoroughly. I tried the overlapping parallel passes method that they recommend, and this works pretty well. I was worried that I might get a "double heavy" streak where the passes overlap but this not so unless the towelette is fresh, but this is fixable. You can do a pretty natural, casual back-and-forth motion for the most part and it comes out fine. This is NOT a super-finicky product. I made a second or third back-and-forth pass in a few areas, and used circular motion in some places where the trim was textured or a little rough from wear, and it all looked even in the end. Just rub it down into the plastic and even out the sheen while it is uncured and it's good.
4) It cures like you see it when it's still wet. It doesn't lighten up very much as it cures. It just looks a little less wet. So get it right by eye when it is wet and that's pretty much what you will still have in an hour when it is cured.
5) Don't miss a spot! You'll see it for sure if you do because the different is so dramatic. And a "second coat" is not easy or recommended. This is the only once-and-done part that you want to get right, and you have plenty of cure time to be thorough.
6) Use the folded corner of the towelette to get into small corners and edges, like where the trim meets the paint or has an inside corner or some little nook. A fresh towelette is great for getting into small areas because a feather touch applies plenty of product when the towelette is fresh.
The trim now looks amazing and I am entirely satisfied. I will use Cerakote on my other vehicles. The only minor con is a strong ammonia smell when you are up close to it while it is wet. No smell once it is cured. I would definitely wear the recommended gloves while applying. As others say, you will probably drop that towelette on the ground. It's slippery when wet. Keep it folded in quarters as it comes for ease of application. Turn to a new quarter once a side gets dirty or dry and fold it inside out for four more quarters to use.
Bonus, but off-label -- at your own risk:
The product is not intended for the soft rubber around the windows, but I tried it there too, and it looks amazing. All I did was wash the rubber with dish soap like the trim, and I rubbed it a few times with a wet microfiber cloth to get the superficial layer of oxidized rubber off. Then I applied Cerakote. It looks great.
The rubber used to be blotchy and faded. The microfiber evened this out a little. I would not use melamine on the rubber -- this made it look worse in a test section. The Cerakote made it look great: jet black, much shiner, and much more even looking. Not quite "brand new" but far better than I thought possible. I thought I might need to replace the rubber. Now it's looking great next to the jet-black new paint. This afterthought use alone was worth the money.
Can you apply a second coat the next day?
They don't say you can, and I don't recommend it. This is meant to be one-shot, which is why you should check to make sure you don't miss any spots.
I had two areas where I tried a second coat the next day. The first was on the plastic trim between the windshield and the hood. I didn't rub this trim much with melamine beforehand so there was a lighter area (light grey originally, the worst spot) that didn't get as black as the other sections so I did it again, which helped a little, but not much. I didn't wash this area with soap beforehand because I wasn't intending to fix it until I got going. Once you put things back to black you will start noticing other faded things more.
Likewise, I did a second coat on the very top of the soft rubber at the bottom of the windows (the part which faces upward and thus gets the most sun), it wasn't as shiny as the other parts, so I went over that section gently again the next day with a fresh towelette.
As soon as I did it, I thought it was a mistake. This didn't go well initially because the cured coating is very hydrophobic so the new, wet, Cerakote of the second coat goes on smooth initially and then "puddles up" into little droplets a few minutes later. It doesn't want to stick to the first coat. I thought I had messed it up, but I let it cure a little until the sticky phase, and spread it out again with the towelette. It stayed that time but gathered back a little into some streaks. I spread it once more a few minutes later and it looked good. It stayed even. It looks just fine a few days later, so I think it cured OK.
I hope this product last for months as advertised. Even if it doesn't I would totally do it again because the results are superior, I still have half my towelettes left, and the product is not expensive. 10/10 would do again and will recommend to everyone.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 25, 2025
★★★★★ 5
Easy to use, amazing results
Size: TRIM COAT KIT
This is an awesome product that is easy to use and has amazing results. My plastic trim never looked so good.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
★★★★★ 5
Made My Bumper Look Brand New Again
Size: TRIM COAT KIT, Size: TRIM COAT KIT
I used this on the plastic trim and bumper on my truck, and I’m honestly impressed with how it turned out. The faded areas came back to a deep, rich black and really cleaned up the whole look of the rear end.
I prepped everything the right way by washing it first with an all purpose cleaner, then wiping it down with 91% alcohol. I also taped off the surrounding paint and chrome just to be safe. After that, the application was simple and went on smooth without any streaks or blotchy spots.
The difference was immediate. What used to look dull and worn now looks factory-fresh again. It also seems to bond well and not just sit on the surface like some cheaper products I’ve tried before.
Overall, this was easy to use, gave great results, and made a noticeable improvement. I would definitely use it again on other trim pieces.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 4
Good product
Size: TRIM COAT KIT
Good coverage. I've had it on for about 10 days, and it's holding up better than any spray product I've used. Not perfect, but none of those streak lines you get with other products. It's been rained on twice so far.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
good product and value
Size: TRIM COAT KIT
worked great on the 10yr old outback. Lasted several months..until we traded it in for a new outback.. will find something else to use it on...!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 20, 2026