hi gear catalytic converter cleaner Catalytic converter cleaner best cleaning catalyst solution High Quali – MotorPower Care

Note: Ensure safety precautions, such as wearing appropriate protective gear, are followed throughout the process.

Step 1: Locate the Upper stream O2 Sensor

• Identify the upper stream O2 sensor on thecatalytic converter.

Step 2: Vehicle Preparation

• Ensure the vehicle is mostly cold. We recommend starting the car for only 40 seconds from a cold engine before beginning the cleaning process.

Step 3: Access the catalytoc converter 

• Carefully pull out the upper stream O2 sensor to gain access to the catalytic converter honeycomb.

Step 4: Application of Foam Cleaner

• Shake the DPF Foam Cleaner can well.
• Insert the can nozzle (included in the package) until it reaches the Catalytic converter honeycomb.
• Begin spraying the foam cleaner, stopping every 5 seconds and then continuing until the can is empty.

Step 5: Wait for 20 Minutes

• After emptying the can, remove the probe nozzle, reinstall the sensor back into its place, and let it sit for approximately 20 minutes.

Step 6: Add Catalytic Converter Cleaner Additive

• AddMtorPower Care DPF Purge Filter Additive to the diesel tank.

Step 7: Vehicle Startup

• Start the vehicle. perform a 40-minute drive on open roads with slightly higher RPM.

Maintenance:

After the initial cleaning, we recommend using our Catalytic converter cleaner additive every 3000 miles to help maintain a clean and efficient system.

Please follow these steps carefully to ensure the effective cleaning of your vehicle's catalytic converter. Always prioritize safety when working with automotive products.