,
and
Promo Codes Available:
Features:
- Aluminum Construction Shell
- Interior 12v winch motor and cables to raise and lower the roof
- Anderson plug for easy connection
- Made with Riptech Rip Stop canvas
- Easy push button operation with jumper cable override points
- Telescope aluminum ladder with canvas carrying bag
- Dual zippered windows (entry point) on all 4 sides with rubber-coated mesh & Rip Stop solid panels
- Self-deployed & retracted rain fly on all sides
- Dual 12v and USB interior outlet
- Center-mounted LED light
- 1-Year Mechanical Warranty
- 12V Fans: The Regular includes 1 fan and the King and Super King include 2 fans
- Includes Solar Wiring (See Below)
- Color: Black Exterior and Gray Canvas
- Free Shipping!
About Solar Wiring:
- The wiring of the solar wiring runs underneath the roof-lining
- The tent comes with a red Brad Harrison plug on the roof of the tent for easy connection to your solar panel
- It also comes with a red Brad Harrison plug on the bottom of the tent for easy access to your vehicle's wiring
- Remember that the max weight of the roof of the tent is 55lb so if you install any solar panel, it must weigh less.
Specifications:
- When installing the tent, we advise that there is no more than a 20-inch unsupported overhang
- We also advise that the roof rack/load bars should be no less than 50 inches long
- If installing on load bars use three evenly spaced supports
- The tent can be bolted with a minimum of 4, preferably 6 bolts (due to its size and weight, it does not include the regular/universal mounting hardware that can be found on most rooftop tents in the market)
- You can run wiring from the dual battery system with the Anderson plug supplied through the vehicle or you can make an extension.
- If you are doing the wiring from your battery directly to the tent you will need the following:
- An Additional Anderson Plug
- 10 gauge wire
- 15amp In-line fuse (this is to prevent damage if you forget to open the latches
- If you are doing the wiring from your battery directly to the tent you will need the following:
- Positive and Negative energy are to be connected CORRECTLY
- When it comes to opening and closing the tent with the motor, all your bedding can be kept intact. Simply arrange the pillows so they do not get tangled in the ropes
- How it works:
- The tent's winch motor is connected to a series of ropes that run on bearings to effectively pull in the awnings and sides. The rope system inside is essentially paracord rope snaked through various pulleys and arms, as well as the mechanisms for the awning to pull in the sides and awnings when the tent is shut
- The arms and their unique design again assist with the lifting of the tent to ensure that it is rigid when open, essentially strengthening the construction.
- To Open:
- Unclip ALL FOUR latches and ensure they are open before pressing the button to lift the tent
- There is a limit switch that assists with telling the motor when to stop while lifting/lowering the tent
- If you forget to unclip one of the latches the arm inside will bend. This is the ONLY way you can damage the tent from the inside, so be VERY careful. It is easy enough to fix but best avoided and will NOT be covered by warranty.
Dimensions:
| BunduTop Standard: | |
| Standard Size Closed: | 82" x 53" x 12" |
| Standard Size Open: | 82" x 53" x 39" |
| Mattress Size: |
78" x 49" x 4" |
| BunduTop King: | |
| Standard Size Closed: | 82" x 63" x 12" |
| Standard Size Open: | 82" x 63" x 39.5" |
| Mattress Size: |
78" x 59" x 4" |
| BunduTop Super King: | |
| Standard Size Closed: | 118" x 63" x 12" |
| Standard Size Open: | 118" x 63" x 40" |
| Mattress Size: |
114" x 59" x 4" |
Download Free The Bundutec Product Manual
PLEASE NOTE: This tent will be shipped FREE to your nearest Freight Center. You can choose to have it delivered to a Business Address ONLY if you have a Forklift. IT CANNOT be delivered to a Residential area due to the size of the tent itself.